# Abusing Linear Regression to Make a Point

A bunch of people have been sending me links to a particularly sloppy article that (mis)uses linear regression to draw an incorrect conclusion from some data. So I guess I’ve got to got back to good-old linear regression, and talk about it a bit.

If you have a collection of data – typically data with one independent variable, and one dependent variable (that is, the first variable can vary any way it wants; changing it will change the second variable), then you’re probably interested in how the dependent variable relates to the independent. If you have reason to believe that they should have a linear relationship, then you’d like to know just what that linear relationship is.

If your data were perfect, then you’d just need to plot all of the data points on a graph, with the independent variable on the X axis, and the dependent on the Y, and then your graph would be a line, and you could get its slope and Y intercept, and thus completely capture the relationship.

But data is never perfect. There’s a lot of reasons for that, but no real set of collected data is ever perfect. No matter how perfect the real underlying linear relationship is, real measured data will always show some scatter. And that means that you can draw a lot of possible lines through the collected data. Which one of them represents the best fit?

Since that’s pretty abstract, I’m going to talk a bit about an example – the very example that was used to ignite my interest in math!

Back in 1974 or so, when I was a little kid in second grade, my father was working for RCA, as a physicist involved in manufacturing electronics for satellite systems. One of the important requirements for the products they were manufacturing was that they be radiation hard – meaning that they could be exposed to quite a bit of radiation before they would be damaged enough to stop working.

Their customers – NASA, JPL, and various groups from the U. S. Military, had very strong requirements. They had to show, for a manufacturing setup of a particular component, what the failure profile was.

The primary failure mode of these chips they were making was circuit trace failure. If a sufficiently energetic gamma ray hit one of the circuit traces, it was possible that the trace would burn out – breaking the circuit, and causing the chip to fail.

The test setup that that they used had a gamma ray emitter. So they’d make a manufacturing run to produce a batch of chips from the setup. Then they’d take those, and they’d expose them to increasing doses of radiation from the gamma emitter, and detect when they failed.

For trace failure, the probability of failure is linear in the size of the radiation dose that the chip is exposed to. So to satisfy the customer, they had to show them what the slope of the failure curve was. “Radiation hard” was defined as being able to sustain exposure to some dose of radiation with a specified probability of failure.

So, my dad had done a batch of tests, and he had a ton of little paper slips that described the test results, and he needed to computer the slop of that line – which would give the probability of failure as a multiple of the radiation dose.

I walked into the dining room, where he was set up doing this, and asked what he was doing. So he explained it to me. A lot like I just explained above – except that my dad was a much better teacher than me. I couldn’t explain this to a second or third grader the way that he did!

Anyway… The method that we use to compute the best line is called least squares. The intuition behind it is that you’re trying to find the line where the average distance of all of the datapoints from that line is the smallest. But a simple average doesn’t work well – because some of the data points are above the line, and some are below. Just because one point is, say, above a possible fit by 100, and another is below by 100 doesn’t mean that the two should cancel. So you take the distance between the data points and the line, and you square them – making them all positive. Then you find the line where that total is the smallest – and that’s the best fit.

So let’s look at a real-ish example.

For example, here’s a graph that I generated semi-randomly of data points. The distribution of the points isn’t really what you’d get from real observations, but it’s good enough for demonstration. The way that we do that is: first we compute the means of $x$ and $y$, which we’ll call $\overline{x}$ and $\overline{y}$. Then using those, we compute the slope as: $m = \frac{\Sigma_{i=1}^n (x-\hat{x})(y-\hat{y})}{\Sigma_{i=1}^{n} (x-\hat{x})^2}$

Then for the y intercept: $b = \hat{y} - m\hat{x}$.

In the case of this data: I set up the script so that the slope would be about 2.2 +/- 0.5. The slope in the figure is 2.54, and the y-intercept is 18.4.

Now, we want to check how good the linear relationship is. There’s several different ways of doing that. The simplest is called the correlation coefficient, or $r$. $r = \frac{\left(\Sigma (x-\hat{x})\right) \left(\Sigma (y - \hat{y})\right)}{\sqrt{ \left(\Sigma (x-\hat{x})^2\right) \left(\Sigma (y - \hat{y})^2\right) }}$

If you look at this, it’s really a check of how well the variation between the measured values and the expected values (according to the regression) match. On the top, you’ve got a set of products; on the bottom, you’ve got the square root of the same thing squared. The bottom is, essentially, just stripping the signs away. The end result is that if the correlation is perfect – that is, if the dependent variable increases linearly with the independent, then the correlation will be 1. If the dependency variable decreases linearly in opposition to the dependent, then the correlation will be -1. If there’s no relationship, then the correlation will be 0.

For this particular set of data, I generated it with a linear equation with a little bit of random noise. The correlation coefficient is slighly greater than 0.95, which is exctly what you’d expect.

Ok, so that’s the basics of linear regression. Let’s get back to the bozo-brained article that started this.

They featured this graph:

You can see the scatter-plot of the points, and you can see the line that was fit to the points by linear regression. How does that fit look to you? I don’t have access to the original dataset, so I can’t check it, but I’m guessing that the correlation there is somewhere around 0.1 or 0.2 – also known as “no correlation”.

You see, the author fell into one of the classic traps of linear regression. Look back at the top of this article, where I started explaining it. I said that if you had reason to believe in a linear relationship, then you could try to find it. That’s the huge catch to linear regression: no matter what data you put in, you’ll always get a “best match” line out. If the dependent and independent variables don’t have a linear relation – or don’t have any actual relation at all – then the “best match” fit that you get back as a result is garbage.

That’s what the graph above shows: you’ve got a collection of data points that to all appearances has no linear relationship – and probably no direct relationship at all. The author is interpreting the fact that linear regression gave him an answer with a positive slope as if that positive slope is meaningful. But it’s only meaningful if there’s actually a relationship present.

But when you look at the data, you don’t see a linear relationship. You see what looks like a pretty random scatterplot. Without knowing the correlation coefficient, we don’t know for sure, but that line doesn’t look to me like a particularly good fit. And since the author doesn’t give us any evidence beyond the existence of that line to believe in the relationship that they’re arguing for, we really have no reason to believe them. All they’ve done is demonstrate that they don’t understand the math that they’re using.